Harris® 1/8" Dia 50/50 Acid Core Wire Solder comes in a 1 lb spool. Formulated for general purpose soldering, soldering difficult solders such as steels, zinc, heavily oxidized nickel, aluminum, etc. For non-electrical soldering applications like radiator repairs, galvanized gutters, stained glass, and sheet metal.
Features
For soldering ferrous and non-ferrous base metals, except aluminum
Contains an activated flux core and a separate flux application is typically not required
Used primarily for small connections
Heat sources include soldering guns, irons and air-fuel torches
6,000 psi tensile strength
Not recommended for high stress or vibration joints in the cooling industry due to lack of sufficient elongation properties
Do not use for electrical or electronic applications due to corrosive properties of the flux residue
Not for use with plumbing and potable water system applications
Meets ASTM B-32 Specification, Alloy Grade Sn 50 Type WOAP-2
Specifications
ASTM B32 Alloy Grade Sn 50 Type WOAP-2
J-STD-006 Sn50Pb50SbHarris® 0.4
J-STD-004 ORH1
Includes
N/A
Applications
Tin-lead solder is used to solder many ferrous and nonferrous base metals, except aluminum
The solder contains an activated flux core and a separate flux application is typically not required
Cored solders are primarily used for small connections as there is a limited amount of flux available to protect the surface
Heat sources include soldering guns, irons, and air-fuel torches
Tin-lead solders are not recommended in high stress or vibration joints in the cooling industry due to lack of sufficient elongation properties
Acid core solders are not recommended for electrical or electronic applications due to the corrosive properties of the flux residue.
Caution
WARNING: PROTECT yourself and others. Read and understand this information.
FUMES AND GASES can be hazardous to your health.
HEAT RAYS (infrared radiation) from flames or hot metal can injure eyes.
Before use, read and understand the manufacturer’s instructions, Safety Data Sheets (SDS), and y our employer's safety practices.
Keep your head out of fumes.
Use enough ventilation, exhaust at the flame, or heat source, to keep fumes and gases from your breathing zone and the general area.
Wear correct eye, ear, and body protection.
See American National Standard Z49.1, Safety in Welding, Cutting, and Allied Processes, published by the American Welding Society, 8669 Doral Blvd., Doral, Florida 33166
OSHA Safety and Health Standards, available from the U.S. Government Office, Washington, DC 20402.
