Harris® 600 brazing flux is an all-purpose powder flux for use with bronze alloys. This highly active flux can be used dry by dipping the heated alloys into the powder or formed into a paste by mixing with water (20% approx). Applications include steels, cast irons and copper base alloys. Remove residues with a hot water rinse to yield a bright, clean, strong and porosity-free brazed joint. Conforms to ANSI/AWS A5.31 Type FB3-J. Conforms to the EU Reach and RoHS directive.
Features
Used with oxy fuel braze welding using low fuming bronze and nickel silver rods on steel, copper and cast iron
Applied to the rod by preheating the rod end and dipping the rod into the flux
Flux will adhere to the heated rod
General purpose brazing flux
Activity range of 1400 degrees F - 2200 degrees F (760 degrees C - 1204 degrees C)
One-year warranty.
Specifications
Conforms to ANSI/AWS A5.31 Type FB3-J
Conforms to the EU Reach and RoHS directive
Applications
Oxy fuel braze welding using low fuming bronze and nickel silver rods on steel, copper and cast iron
Caution
WARNING: CONTAINS FLUORIDES
PROTECT YOURSELF AND OTHERS
Read and understand this information
BURNS EYES AND SKIN. CAN BE FATAL IF SWALLOWED
FUMES AND GASES can be hazardous to your health
HEAT RAYS, (infrared radiation) from flame or hot metal can injure eyes
Before use, read and understand the manufacturer’s instructions, Material Safety Data Sheets (MSDS), and your employer's safety practices
Keep your head out of fumes. Use enough ventilation, exhaust at the flame, or heat source, to keep fumes and gases from your breathing zone and the general area
Wear correct eye, ear, and body protection
See American National Standard Z49.1, Safety in Welding, Cutting, and Allied Processes, published by the American Welding Society, 8669 Doral Blvd., Doral, Florida 33166 OSHA Safety and Health Standards, available from the U.S. Government Office, Washington, DC 20402.
