Harris® Stay-Clean® Paste Soldering Flux comes in a 1 lb jar and is ideal for most metals, copper, brass, bronze, steel, galvanized and Monel. General-purpose solder paste flux is active up to 700 deg F/371 deg C and works well in soldering tube joints. It offers guaranteed performance with most leaded and lead-free solder compositions.
Features
Designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints
Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux
Stay Clean Paste flux works well with most leaded and lead-free solder compositions
Flux residue should be removed after soldering
Specifications
O-F-506 C Type 1 Form A
A-51145 D Type 1 Form A
Applications
Use to solder copper and brass and sine grades of clean steel
Can also be used for stainless steel or other metal alloys (except aluminum)
Use in some select plumbing applications
Caution
PROTECT yourself and others.
Read and understand this information.
FUMES AND GASES and VAPORS can be hazardous to your health.
FLUX IS CORROSIVE: may be harmful or fatal if inhaled or swallowed. FLUX CAUSES SKIN AND EYE BURNS. KEEP OUT OF THE REACH OF CHILDREN. HEAT RAYS (infrared radiation) from flame or metal can injure eyes.
Before use, read and understand the manufacturer’s instructions, Safety Data Sheets (SDS), and your employer's safety practices.
Keep your head out of fumes.
Use enough ventilation, exhaust at the flame, or heat source, to keep fumes and gases from your breathing zone and the general area.
Wear correct eye, ear, and body protection.
See American National Standard Z49.1, Safety in Welding, Cutting, and Allied Processes, published by the American Welding Society, 8669 Doral Blvd., Doral, Florida 33166 OSHA Safety and Health Standards, available from the U.S. Government Office, Washington, DC 20402.
