Airgas - IRT2135PTIMAX - Ingersoll Rand 1/2" Square Drive Air Impact Wrench

Hover cursor over image to view larger picture

Ingersoll Rand 1/2" Square Drive Air Impact Wrench

Airgas Part #:IRT2135PTIMAX

Manufacturer Part #:2135PTIMAX

$601.00 /Each

Ingersoll Rand 5 CFM 1/2" Square Pin Anvil Drive Air Impact Wrench measuring 7.35" in length has a maximum torque rating of 780 ft-lb. and has an optimized airflow to ensure maximum performance. Titanium composite housing hammer case impact wrench with free speed of 9800 RPM has an air inlet NPT female size of 1/4" and a minimum sized hose of 3/8". Impact wrench has a reverse cycle rate of 1250 blows per minute and a patented 1-hand forward/reverse for easy operation. Impact wrench has a 4-position power regulator dial and a feather-touch trigger for maximum control. It has a twin-hammer mechanism to utilize proprietary advanced metallurgy and a hard coat anodized end plate can withstand in tough jobs. It has a piston handle and a noise level of 86 dB.

Power: This wrench's high torque output and power regulator allow easy control over your tool.
Durability: With a composite housing and a hammer case made of titanium, this wrench can endure repeated drops and harsh environments.
Reliability: With twin hammer mechanism and powerful motor, the 2135PTiMAX is built not only for performance, but to last.

Product Type

» Air Impact Wrench

Speed

» 9800 RPM/1250 BPM

Tool Air Consumption

» 5 CFM Average
» 20 CFM Load

Drive/Chuck Size

» 1/2"

Drive/Chuck Type

» Square

Minimum Hose Size

» 3/8"

Tool Air Inlet

» 1/4" NPT

Torque Rating

» 1100 ft-lb Max
» 600 ft-lb Working

Required PSI

» 90