Weiler® Dualife™ Roughneck® 6" X 0.02" Light Duty Very Narrow Face Stringer Bead Twist Knot Wire Wheel Brush with 5/8" - 11 UNC arbor hole is intended for use on straight grinders as well as stationary machines such as bench or pedestal grinders, buffing lathes and rotates at a speed of 12500 RPM. Carbon steel brush with a trim length of 1 1/8" has a solid ring construction that ensures the brush will run smoother and last longer, even in the toughest application situations. It provides a flexible brushing action and a consistent performance for demanding light-duty cleaning and deburring applications. Tube brush cleans surfaces in the same manner as sand blasting. Due to its high rotating speed, it separates surface contaminants from base material and does not remove base material or change part dimensions. Unlike non-woven, bonded and coated abrasives, wire brushes will not load when brushing soft materials or when used to remove paint and similar coatings. Application areas include cleaning rust, scale and oxidation, deburring, weld cleaning, roughening surfaces, edge blending and surface preparation.