3M™ Cloth Belt 341D, 36 X-weight, 3-1/2 in x 15-1/2 in, Fabri-lok, Single-flex, 50 ea/Case
Features
Tube-shaped band fits inner and outer contours to remove parting lines, imperfections, and burrs
X-weight cloth backing withstands heavy sanding and grinding
Resin bond withstands high heat and pressure
Tough aluminum oxide abrasive mineral cuts fast and performs well on many substrates
Bands fit onto a rubber expander wheel attachment (sold separately) for use with a die grinder or rotary drill
Specifications
OSHA Hazard Communication Standard, 29 CFR 1910.1200
Applications
Metal Working
Caution
Do not breathe thermal decomposition products. For industrial or professional use only. Do not use in a confined area with
minimal air exchange. Avoid breathing of dust created by sanding, grinding or machining. Damaged product can break apart
during use and cause serious injury to face or eyes. Check product for damage such as cracks or nicks prior to use. Replace if damaged. Always wear eye and face protection when working at sanding or grinding operations or when near such operations. Avoid release to the environment. Combustible dust may form by action of this product on another material (substrate). Dust generated from the substrate during use of this product may be explosive if in sufficient concentration with an ignition source. Dust deposits should not be allowed to accumulate on surfaces because of the potential for secondary explosions.
